Textual Modalities for: Plasticizer/additive based plastic materials
Records: Showing 20 of 1191 total records
Page: 27 of 60
| Code | Title | Description | Source | Word Counts | URL |
|---|---|---|---|---|---|
| 282104.0 | Microplastic Pollution and Human Health - National Institute of ...PDF | manufactured for some use. For example, the plastic pellets that are used as raw material for making... | Total words: 1,085 | based: 1 | plastic: 11 | materials: 1 | View | |
| 282104.0 | Production of Fuel from Plastic Waste: A Feasible Business | (out of 20,000 tons of plastic waste) The 20,000 tons was based on the amount of plastic waste colle... | Total words: 3,720 | based: 8 | plastic: 66 | materials: 8 | View | |
| 282104.0 | FTC Cracks Down on Misleading and Unsubstantiated Environmental ... | Each of the FTC’s plastics matters and, where appropriate, the proposed consent order, and the pap... | Total words: 2,231 | based: 8 | plastic: 16 | materials: 5 | View | |
| 282104.0 | Keeping up with 3D Printing: EPA Researchers Build on New Plastic ... | This research plays an important part in EPA’s mission to protect human health and the environment... | Total words: 869 | based: 2 | plastic: 4 | materials: 3 | View | |
| 282104.0 | Triphenyl Phosphate (TPP): Technical Report on the Conditions of UsePDF | Prepared for Earthjustice by Material Research L3C November 2019 . 4 . pressure additive for lubrica... | Total words: 3,657 | based: 1 | plastic: 8 | materials: 4 | View | |
| 282104.0 | 3D printing of biomass-derived composites: application and ... | 1. Introduction. Three-dimensional (3D) printing, also known as additive manufacturing (AM), is a pr... | Total words: 16,532 | based: 6 | plastic: 8 | materials: 87 | View | |
| 282104.0 | A Review on the Role of Earthworms in Plastics Degradation: Issues and ... | Based on this review, the challenges faced in earthworm application for plastic degradation are most... | Total words: 8,257 | based: 7 | plastic: 77 | materials: 23 | View | |
| 282104.0 | Edible Film Casting Techniques and Materials and Their Utilization for ... | The following types of plasticizer are frequently used in the production of edible films: (1) monosa... | Total words: 10,807 | based: 11 | plastic: 4 | materials: 21 | View | |
| 282104.0 | Natural Antimicrobials as Additives for Edible Food Packaging ... | Films and coatings prepared from biodegradable materials are increasingly being used in the food pac... | Total words: 13,287 | based: 17 | plastic: 5 | materials: 21 | View | |
| 282104.0 | Additives in synthetic polymers: an overview - PubMed | The 14 major classes of additives in plastics, e.g., plasticizers, flame retardants, heat stabilizer... | Total words: 973 | plastic: 1 | View | |
| 282104.0 | Carbon Fiber 3D Printing: Technologies and Performance—A Brief Review | Other studies have used innovative additive techniques to impregnate carbon fiber with the plastic m... | Total words: 9,061 | based: 5 | plastic: 4 | materials: 41 | View | |
| 282104.0 | Migration of plasticizers from poly(vinyl chloride) and multilayer ... | In multilayer bags, DEHP was not found but instead, two plasticizers were detected namely dibuthylph... | Total words: 1,520 | plastic: 2 | materials: 6 | View | |
| 282104.0 | High-Z Sensitized Plastic Scintillators: A Review - OSTI.GOV | utilized as a means of secondary inspection to augment the plastic based portal monitors. As such, t... | Total words: 9,526 | based: 24 | plastic: 47 | materials: 34 | View | |
| 282104.0 | Exposure assessment of plastics, phthalate plasticizers and their ... | Bio-based fertilizers (BBFs) produced from organic waste have the potential to reduce societal depen... | Total words: 1,520 | plastic: 6 | materials: 1 | View | |
| 282104.0 | Using Waste Plastics as Asphalt Modifier: A Review - PubMed | This review presents analyses and comparisons of various forms of waste plastic used in asphalt modi... | Total words: 1,528 | plastic: 11 | materials: 9 | View | |
| 282104.0 | Water Vapor Permeation in Plastics - Pacific Northwest National LaboratoryPDF | material degradation that adversely affects gamma ray detection performance under certain conditions... | Total words: 8,260 | based: 8 | plastic: 56 | materials: 18 | View | |
| 282104.0 | ORNL scientists close the cycle on recycling mixed plastics | Polycarbonates deconstruct at 266 F (130 C), polyurethanes at 320 F (160 C), polyethylene terephthal... | Total words: 877 | plastic: 6 | materials: 10 | View | |
| 282104.0 | DESIGN RULES FOR ADDITIVE MANUFACTURING: A CATEGORIZATION - NIST | rules that relate AM processes, capabilities, and materials [38– 40]. A few reports have articulat... | Total words: 5,292 | based: 40 | plastic: 1 | materials: 14 | View | |
| 282104.0 | Recent Advances in Zinc Oxide Nanoparticles (ZnO NPs) for Cancer ... | Nanoscale materials offer strong potential for curing cancer as they pose low risk and fewer complic... | Total words: 18,782 | based: 6 | materials: 10 | View | |
| 282104.0 | Comparison of isopropanol and isooctane as food simulants in ... | Much concern has arisen from that fact as most of these plastics contain high amounts of additives w... | Total words: 1,052 | plastic: 2 | materials: 1 | View |
Page 27 of 60 (1191 records)